AutoCAD Electrical ladder diagram of a motor starter control circuit with wire numbers and cross-references
Professional Certificate in Electrical Design & Drafting

AutoCAD Electrical Course in Kerala

Master electrical schematic design, control circuit drafting and panel layout documentation with Autodesk AutoCAD Electrical. Learn project setup, schematic creation, wire numbering, component management, cross-referencing, panel layouts and electrical reports through guided practical training at our centres in Kochi, Thrissur, Chalakudy, Irinjalakuda, Attingal & Palakkad.

Explore Syllabus
Autodesk logo
CTDS certification logo
AICTE logo
Certiport Authorized Testing Center logo
Control panel layout drawing with DIN rails, wire ducts, contactors, PLC and terminal strip created in AutoCAD Electrical Learners practising CAD software in the CORE Institute computer lab
Hands-on Lab Training
About the Course

Design Electrical Control Systems the Industry Way

AutoCAD Electrical is a specialised toolset within Autodesk's AutoCAD platform, designed to support the creation, modification and documentation of electrical control systems. It provides purpose-built functions for electrical schematics, component tagging, wire numbering, cross-referencing, panel layouts and project reporting.

The programme at CORE Institute of Technology helps you understand and apply these capabilities through structured software training and practical assignments. You progress from project setup and basic schematic workflows to coordinated drawings, panel documentation and a final project.

  • Project-based workflows
  • Ladder & control schematics
  • Wire numbering & tagging
  • PLC I/O documentation
  • Panel layout drawings
  • Reports & deliverables
Who Should Enrol

Built for Electrical Learners and Professionals

Whether you are a student, a technician or a working draftsman, this course adds a specialised electrical CAD skill to your profile.

Electrical & Electronics Engineering students and graduates (B.E./B.Tech)
Diploma holders in Electrical & Electronics Engineering
ITI electricians and electrical technicians with basic circuit knowledge
Electronics, Instrumentation & Control Engineering learners
Electrical draftsmen, CAD operators and control-panel documentation staff
Electrical maintenance and industrial automation professionals

Recommended entry knowledge: basic electrical engineering concepts, familiarity with electrical symbols and circuits, and general computer skills. Learners without prior CAD experience get an introductory orientation, and engineering graduates from other branches can join to add electrical CAD to their profile after a short electrical fundamentals bridge module.

You can excel in this course if you're: ITI Diploma B.E. / B.Tech Final-year student Working professional
Key Benefits

What You Gain From AutoCAD Electrical Training

Industry-relevant software skills to create, manage and document electrical control-system drawings.

Schematic & Control Circuits

Build skills in creating and editing electrical schematics and control-circuit drawings.

Project-Based Workflows

Organise drawings and manage electrical design files, and improve consistency and productivity with specialised electrical tools.

Wires, Tags & References

Understand wire numbering, component tagging, cross-references and off-page connections.

Panel Layout Documentation

Create panel-layout drawings from schematic component information.

Electrical Reports

Generate, customise and export electrical project reports such as bills of material and wire lists.

Portfolio Project

Develop a portfolio project that demonstrates practical, end-to-end software application.

Programme Snapshot

45 Hours of Structured Practice

Instructor-led software training with individual hands-on practice, following a demonstration, guided exercise, independent practice and project-work approach.

45guided learning hours
6-8weeks of training
10modules with competency goals
7 + 1practical assignments and a capstone

Your Electrical Drawing Workflow

  1. Project Setup
  2. Schematics & Symbols
  3. Wires & Numbers
  4. Tags & Cross-Refs
  5. Panel Layout
  6. Reports & Output

Software: Autodesk AutoCAD Electrical (the version installed at the training centre). Duration is a planning recommendation, not an Autodesk-prescribed duration, and may be adjusted to your profile, delivery mode and depth of practical work.

10 Modules

AutoCAD Electrical Syllabus

Based on the functional areas in Autodesk's AutoCAD Electrical documentation, from the interface and project manager to panel layouts, reports and a portfolio project.

Module 1 · 3 hrs Trainer introducing CAD software to learners in a computer lab

Introduction to AutoCAD Electrical

Topics

  • Overview of AutoCAD and the AutoCAD Electrical toolset
  • Interface and workspace
  • Project manager and drawing environment
  • Templates and basic file handling

Learning Outcomes

  • Identify the main areas of the interface and explain the purpose of the electrical toolset
  • Open, navigate and save drawings using an organised file structure
Module CompetencyLearner can navigate the application, identify core tool groups and manage basic drawing files.
Module 2 · 4 hrs AutoCAD Electrical project manager listing the drawings of a motor starter project

Project Setup & Drawing Management

Topics

  • Creating and configuring a project
  • Project properties and project-related settings
  • Adding and organising drawings
  • Drawing properties and title-block considerations

Learning Outcomes

  • Create a project and add drawings to it
  • Apply basic project and drawing settings and maintain an organised project structure
Module CompetencyLearner can create and maintain a basic AutoCAD Electrical project with multiple drawings.
Module 3 · 6 hrs Ladder schematic with stop and start push buttons, contactor coil, overload and pilot lamps

Electrical Schematics & Symbols

Topics

  • Schematic drawing workflow and symbol libraries
  • Inserting and editing components
  • Symbol attributes and component descriptions
  • Ladder and circuit structures
  • Basic control-circuit representation

Learning Outcomes

  • Select and insert appropriate schematic symbols
  • Create and modify a basic electrical control schematic
  • Edit component attributes and descriptions
Module CompetencyLearner can prepare a clear schematic drawing using appropriate symbols and component information.
Module 4 · 5 hrs Wire numbers and destination signal arrows that link schematic sheets in AutoCAD Electrical

Wires, Wire Numbers & Signal References

Topics

  • Wire types and insertion
  • Wire numbering and wire-number formats
  • Wire sequence and updates
  • Source and destination signal arrows
  • Off-page connections and reference handling

Learning Outcomes

  • Insert and modify wires in a schematic
  • Apply wire numbers and update numbering where required
  • Create and interpret signal references and off-page connections
Module CompetencyLearner can create a connected schematic with consistent wire-numbering and signal-reference practices.
Module 5 · 5 hrs Parent contactor coil with child contacts and a cross-reference table

Component Tags & Cross-Referencing

Topics

  • Component tagging and tag formats
  • Parent and child relationships
  • Cross-reference configuration and updates
  • Component editing and replacement
  • Drawing-to-drawing references

Learning Outcomes

  • Apply and revise component tags
  • Use cross-reference tools to coordinate related components
  • Review drawing consistency after component changes
Module CompetencyLearner can manage component identifiers and produce coordinated schematic references.
Module 6 · 4 hrs PLC digital input module drawing with I/O addresses wired to push buttons and float switches

PLC-Related Drawings & Documentation

Topics

  • PLC module representation in electrical schematics
  • PLC I/O drawing workflows
  • Module and I/O documentation
  • Linking PLC information with schematic documentation

Learning Outcomes

  • Identify the role of PLC I/O representations in electrical drawings
  • Create or edit a basic PLC-related drawing using available toolset functions
  • Document PLC I/O information in a drawing context
Module CompetencyLearner can prepare basic PLC-related electrical documentation. This module is not PLC logic programming or PLC commissioning.
Module 7 · 6 hrs Panel layout with breaker, contactor and PLC footprints, wire ducts and a terminal strip

Panel Layout Creation

Topics

  • Panel layout concepts
  • Panel footprints and component representation
  • Generating layouts from schematic component lists
  • Inserting and editing footprints
  • Terminals, nameplates and layout annotation

Learning Outcomes

  • Explain the relationship between schematic components and panel representations
  • Create and edit a basic panel layout drawing
  • Add relevant component and annotation information
Module CompetencyLearner can prepare a basic panel layout drawing linked to schematic component information.
Module 8 · 4 hrs Engineers reviewing a set of drawings together

Productivity & Project-Wide Tools

Topics

  • Project-wide retagging
  • Project-wide wire-number updates
  • Component substitution and editing
  • Drawing updates
  • Productivity tools and quality checks

Learning Outcomes

  • Apply selected project-wide update tools
  • Recognise when a project-wide update is required and review its effect on drawings
Module CompetencyLearner can use selected productivity tools to maintain drawing consistency across a project.
Module 9 · 4 hrs Bill of materials and wire from-to report exported from an AutoCAD Electrical project

Electrical Reports & Output

Topics

  • Generating reports from project data
  • Component and wire information
  • Report configuration, formatting and export
  • Drawing checks
  • Plotting and issuing project deliverables

Learning Outcomes

  • Generate selected reports from project data
  • Customise or configure report output within the available workflow
  • Prepare drawings and reports for review or submission
Module CompetencyLearner can produce a basic set of electrical project documentation and report outputs.
Module 10 · 4 hrs Electrical control panel and cable trays in a building plant room

Integrated Project & Portfolio

Topics

  • Project planning and drawing set development
  • Schematic and panel documentation
  • Wire and component checks
  • Report generation
  • Final review and presentation

Learning Outcomes

  • Complete an integrated electrical drawing documentation assignment
  • Explain the project workflow and key design-documentation decisions
  • Submit a well-organised project folder and present the completed work
Module CompetencyLearner can demonstrate the core course competencies through a practical project.

Electrical Fundamentals Bridge

For learners from a non-electrical background, completed before the advanced schematic exercises.

  • Electrical circuits and components
  • Electrical symbols and drawing conventions
  • Reading basic control circuits
  • Introductory CAD orientation for first-time users

Knowledge Checks & Feedback

Built into every module so you know where you stand.

  • Short quizzes on drawing conventions and workflows
  • Trainer feedback on readability and naming
  • Review of wire numbering and tagging consistency
  • Project folder organisation checks

By the End of the Course You Can

Navigate AutoCAD Electrical and manage a basic project
Create and edit electrical schematic drawings
Insert wires, assign wire numbers and manage signal references
Apply component tags and use cross-referencing
Prepare basic PLC-related schematic documentation
Create panel layouts coordinated with schematic data
Update and review drawings with project-wide tools
Generate electrical reports and drawing deliverables
Complete and present an integrated documentation project
Practical Training

7 Hands-On Practical Assignments

Every assignment produces a real deliverable you can add to your portfolio, using consistent training files and a sample electrical project across modules.

AutoCAD Electrical practical assignments and their deliverables
No.AssignmentEvidence / Deliverable
1Project creation and drawing organisationA configured project with an organised drawing set
2Basic electrical control schematicSchematic drawing with appropriate symbols and components
3Wire numbering and signal referencesUpdated drawing with wire numbers and references
4Component tagging and cross-referencingCoordinated drawing set with component tags and references
5PLC-related schematic documentationBasic PLC I/O representation drawing
6Panel layout exercisePanel layout drawing with component footprints and annotations
7Project-wide update and reportingUpdated project files and an exported report
Capstone drawing of a direct-on-line motor starter control circuit with title block
Capstone Project

Electrical Control System Drawing & Panel Documentation

You prepare a coordinated drawing package for a representative electrical control application, such as a motor starter or a small pump-control system, matched to your electrical fundamentals. It is a training documentation project, not an approved-for-construction design.

  • Project folder with logical drawing organisation
  • Electrical schematic with selected components and wires
  • Wire numbers, component tags and cross-references
  • Basic PLC representation, if in the project scope
  • Panel layout with footprints and annotations
  • Component or wire report exported from the project
  • Short presentation of your workflow and drawing set
Assessment

How Your Skills Are Assessed

A balanced mix of guided tasks, independent tests and project work, explained to you before enrolment.

20%

Module Exercises

Completion and correctness of guided tasks
25%

Practical Skill Test

Independent use of core schematic and project tools
20%

Drawing Quality Review

Legibility, consistency, tagging, numbering and references
25%

Capstone Project

Completeness and coordination of the final drawing package
10%

Presentation / Viva

Understanding of workflow and ability to explain decisions

Completion criteria: minimum 75% attendance and a 50% overall assessment score, with successful submission of the capstone project.

How You Learn

Demonstrate, Practise, Review

Trainer leading a classroom session at CORE Institute

01.Learn

  • Watch each major tool workflow demonstrated by a technical trainer
  • Follow along on a consistent sample electrical project
  • Take short knowledge checks on drawing conventions
Learners practising on individual computers in the CORE CAD lab

02.Practise

  • Work hands-on with individual computer access wherever possible
  • Complete 7 practical assignments with real deliverables
  • Get structured feedback on readability, naming, numbering and organisation
CORE learners holding their course certificates in the CAD lab

03.Achieve

  • Deliver and present your capstone drawing package
  • Keep your project files as portfolio evidence, with your consent
  • Get career guidance and placement assistance
CORE Institute graduates receiving their course completion certificates
Certification

Earn Your Professional Certificate

Learners who meet the attendance and assessment requirements receive the Certificate of Completion: Professional Certificate in AutoCAD Electrical Design, issued by CORE Institute of Technology.

  • CORE Certificate of Completion
  • CTDS Certificate
  • Autodesk Authorised Training Centre
  • Certiport Authorised Testing Centre

The CORE course certificate is not an Autodesk-issued certification. If you choose to take an Autodesk certification exam, it is a separate exam with its own eligibility and assessment requirements.

Career Opportunities

Careers After AutoCAD Electrical

The skills you build support applications for entry-level and support roles in electrical design and documentation.

Electrical CAD Designer
Electrical Draftsman
Electrical Design Assistant
Control Panel Drafting Technician
Electrical Documentation Technician
PLC / Automation Documentation Assistant
Electrical Project Documentation Assistant
Junior Electrical Design Engineer*

Where You Can Work

Electrical engineering consultancies Control-panel manufacturers Industrial automation companies Manufacturing facilities EPC contractors Electrical equipment manufacturers Engineering design-service providers

Good to know: AutoCAD Electrical is a design and documentation toolset. This course does not, by itself, qualify you as a PLC programmer, licensed electrical engineer or electrical installation supervisor. *Junior Electrical Design Engineer roles depend on your engineering qualification and the employer's requirements.

Students and faculty at CORE Institute of Technology

Enroll Now

Take the next step in electrical design engineering. Contact us for the next batch, course duration, fees and admission details.

45 Guided HoursCapstone ProjectPlacement AssistanceClassroom | Online

Career Roles and What They Need

How AutoCAD Electrical course competencies map to career roles
Potential RoleRelevant Course CompetenciesAdditional Requirements May Include
Electrical CAD DesignerSchematic drafting, symbols, wire numbering, project organisationElectrical fundamentals, drafting standards, portfolio
Electrical DraftsmanDrawing creation, editing, annotation and plottingDrafting experience and drawing conventions
Control Panel Drafting TechnicianPanel layout, footprints, component data and documentationPanel components, wiring practices and industry standards
Electrical Documentation TechnicianCross-referencing, project updates and reportsDocument control and project workflows
Junior Electrical Design EngineerElectrical schematic and drawing documentationRelevant engineering qualification and design experience
PLC Documentation AssistantPLC-related schematic and I/O documentationPLC fundamentals; programming needs separate training
Why CORE

Why Train With CORE?

CORE Institute of Technology, The Responsible Skill Trainer.

Autodesk Learning Partner

A software-focused training environment at an Autodesk Authorised Training Centre.

Structured & Practical

Industry-oriented learning that moves from fundamentals to a coordinated drawing set.

Guided Assignments & Final Project

Seven practical assignments and an integrated capstone you can show employers.

Technical Trainer Support

Personal feedback on drawing quality, numbering, tagging and project organisation.

Career Guidance & Placement Assistance

Support with your next step, subject to CORE's policies and employer requirements.

Centres Across Kerala

Learn in Kochi, Thrissur, Chalakudy, Irinjalakuda, Attingal or Palakkad, or online.

About CORE

6000+alumni and students
100+experts vetted the curriculum
150+reputable partners have hired from us
45+countries represented by our alumni
Keep Growing

Pair AutoCAD Electrical With In-Demand Courses

Build a broader electrical design pathway with follow-on courses. These are separate programmes and are not part of the AutoCAD Electrical syllabus.

Admission

Join the Next Batch

Learn AutoCAD Electrical and develop practical skills in electrical schematics, control-circuit drawings, panel layouts and project documentation.

  1. Enquire about the course
  2. Speak to an academic counsellor
  3. Confirm your batch, mode and centre
  4. Review the attendance and assessment criteria
  5. Complete payment and reserve your seat

Batches, Fees & Admission

  • Ask about the next batch schedule
  • Classroom, online or hybrid
  • Call Kochi (H.O): +91 9496223333
T&C apply.
Accreditation

Our Certifications & Affiliations

Core Institute of Technology is an authorised certified training centre.

CORE Institute of Technology certifications and affiliations including CTDS, Autodesk, ASNT, Certiport, SAP and Tally

Frequently Asked Questions

What is AutoCAD Electrical used for?

AutoCAD Electrical is a specialised toolset within Autodesk AutoCAD for creating, modifying and documenting electrical control systems. It adds purpose-built tools for electrical schematics, component tagging, wire numbering, cross-referencing, panel layouts and project reports.

Who can join the AutoCAD Electrical course?

The course suits B.E./B.Tech and Diploma holders in Electrical and Electronics Engineering, ITI electricians and technicians, Electronics, Instrumentation and Control learners, working electrical draftsmen and CAD operators, and maintenance or automation professionals who prepare or read electrical drawings.

How long is the AutoCAD Electrical course?

The programme has 45 guided learning hours across 10 modules and is usually delivered over 6 to 8 weeks. CORE may adjust the hours to the learner profile, delivery mode and depth of practical work.

Do I need prior AutoCAD experience?

No. Prior AutoCAD experience helps but is not mandatory, because learners new to CAD get an introductory orientation. Basic knowledge of electrical circuits, components and symbols is recommended, and learners from a non-electrical background complete a short electrical fundamentals bridge module first.

What does the AutoCAD Electrical syllabus cover?

The 10 modules cover the AutoCAD Electrical interface, project setup and drawing management, electrical schematics and symbols, wires and wire numbers, signal references, component tags and cross-referencing, PLC-related drawings, panel layouts, project-wide tools, electrical reports and an integrated portfolio project.

Does this course teach PLC programming?

No. Module 6 teaches how PLC modules and I/O are represented and documented in electrical drawings. PLC logic programming and commissioning need separate training, which CORE can suggest as a follow-on course.

Which certificate will I receive?

Learners who meet the attendance and assessment requirements receive a CORE Institute of Technology Certificate of Completion for the Professional Certificate in AutoCAD Electrical Design. This is not an Autodesk-issued certification. Any Autodesk certification exam is separate and has its own eligibility and assessment.

How is the course assessed?

Assessment combines module exercises (20%), a practical skill test (25%), a drawing quality review (20%), the capstone project (25%) and a project presentation or viva (10%). The suggested completion criteria are at least 75% attendance, a 50% overall score and submission of the capstone project.

What jobs can I apply for after learning AutoCAD Electrical?

The skills support entry-level and support roles such as Electrical CAD Designer, Electrical Draftsman, Control Panel Drafting Technician, Electrical Documentation Technician, PLC or Automation Documentation Assistant and, with a relevant engineering qualification, Junior Electrical Design Engineer.

Can I learn AutoCAD Electrical online?

Yes. You can choose classroom training at a CORE centre, live online classes, or a hybrid of both, with individual hands-on practice on the software in every mode.

Where can I attend AutoCAD Electrical classes in Kerala?

CORE Institute of Technology has centres in Kochi (Kacheripady), Thrissur, Chalakudy, Irinjalakuda, Attingal (Trivandrum) and Palakkad.
Visit Us

AutoCAD Electrical Training Centres in Kerala

Kochi (Head Office)

Ground Floor, V&S Building, Mariaman Kovil Road, Kacheripady, Kochi, Ernakulam, Kerala 682018

Thrissur (Regional Office)

Korappath Building, 2nd Floor, Machingal Line, MG Road, Naikkanal, Thrissur, Kerala 680001

Chalakudy, Thrissur District

2nd Floor, Pulan Complex, KSRTC Bus Stand Road, Chalakudy, Kerala 680307

Irinjalakuda

2nd Floor, Edapully Emporium, Irinjalakuda Main Rd

Attingal, Trivandrum

1st Floor, Jasim Towers, above ICICI Bank, Attingal, Kerala 695101

Palakkad

H.M Tower, 2nd Floor, Coimbatore Rd, Kalmandapam, Palakkad, Kerala 678001